Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsive cooking control of gas cooktops, but requires an electric oven to bake? Find a dual fuel cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs with expertise in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques like charring. These powerful stoves are costly, especially if they require an additional gas connection as well as an electrician for installation.
What is a 13amp plug?
If you own a dual-fuel range cooker (also called a gas and electric oven), you will need an electrical outlet of 13 amps. The plug will also have to be wired hard into the cooker circuit ring by a certified electrician.
This ensures that the current flowing through the plug does not exceed the limit of safety which could cause an electrical fire. The plug has an electrical fuse that regulates the current. The fuse will blow as soon as it is overloaded. This protects the appliance from an overload of electricity.
The fuse is rated at 13 amps, which is shown on top of the plug. This is the maximum amount of current the plug can pass without damaging the appliance or heating the socket. It is essential that when replacing fuses you always use the same rated amps as the original. If you replace the fuse using one with a different rating, then you are at risk of overheating the socket, and potentially putting yourself and others in serious risk.
Ceramic 13 amp fuses are extremely robust and can withstand the high temperatures that can be generated by an oven. The ceramic element is also fire-proof, making it a more suitable choice than other types of fuse.
There are a few different ways that a 13 amp plug could be connected. The plug can be connected to a live socket using either a screw or a jaw cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Some plugs have a cardboard wiring diagram over the pins. These should be removed before connecting the wires. It is essential that the wires be cut to the proper length since leaving them too long can result in them becoming crushed when the plug cover is replaced. The earth wire should be the longest wire to ensure it is connected before the line and neutral pins.
How do I connect the 13amp plug?
The vast majority dual cookers that use fuel in the UK are powered by an amp rating of 13 amps. This is crucial because ovens draw a substantial current, while normal plug sockets have a 10 amp rating.
Generally speaking new appliances should be fitted with plugs at the time of sale. This is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug and this is the problem.
When connecting a cooker to an existing plug socket the first thing that needs doing is to make sure that the rating of the fuse in the box is in line with the plug's rating. This is important because an incorrectly-sized fuse can be dangerous.
It is also recommended to ensure that the fuse is completely seated into the cartridge, and there isn't any excessive movement. The next step is to prepare the flex to be used. Remove cheap dual fuel range cookers to reveal the three conductors insulated. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) using a knife without penetrating the individual conductors that are insulated. This nick must be large enough to allow for the sheathing and cable to separate when the sheathing is pulled back. Cut off the excess sheathing leaving about 40mm beyond the flex.
The flex is placed over the plug with the earth terminal on top and the neutral and live terminals at the bottom. Using the coloured conductors to guide you to the right direction, the sheathing should be removed from each pin, and the internal cable is then plugged to the correct terminal using the cord grip. If the plug is fitted with a screw-type cord clamp loosen it and pull back the insulation to expose the copper conductors. Connect each wire that is insulated to the appropriate terminal by using the channel inside the plug. Start with the earth conductor first, then the neutral and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw of a 13amp plug is 3kw at 230volts. This is quite a bit of power, however the standard fuse fitted in a UK plugtop will not fail until the cable has heated to a dangerous temperature. It is important to be aware of the amount of electricity you use in your kitchen, since a defective plug or socket can lead to a fire.
The fuses in plugtops are ceramic, approximately 25mm long and 240V mains rated. They'll have an BS kitemark or similar mark on the side, and they contain sand. Alternatives to glass or plastic are available, but they should not be used in conjunction with a live plug.
Most dual fuel range cookers sold in the UK require hard-wired and are not able to plug directly into an outlet on the wall. They are typically connected to a separate cooker ring circuit that is suitable for appliances that use up to 20 amps.
You can test the ring circuit of your home by looking at the fuse box or by asking an electrician nearby. Ask them if the sockets are connected to the same ring, or if they are separate. They will also be able to tell you if there's an individual circuit that powers your oven.
If you're considering buying a brand new dual fuel range cooker, the size of your kitchen is a vital aspect to take into consideration. We have a wide range of cookers that can fit any space. Choose from compact 50-60cm dual-fuel models, or the huge 90cm+ double ovens by leading brands such as Rangemaster and StovesAreUs.
If you're looking for something different, don't worry - we also have a wide range of gas and electric multi-function cookers. These multifunction cookers allow you to cook a variety of meals, such as pasta, casseroles, and curries.
Explore our entire range of Cookers in Currys on our website or visit us in store to take a look. We offer free home installation and delivery on a selection of range cookers as well as flexible payments options. If you have any questions our team is ready to assist you by sending us an email or give us a call. Credit is subject to the status of the account, and terms and condition apply.
What is the maximum draw of an appliance switch?
There is a lot confusion about the maximum current draw for the cooker switch. The fact is, most cookers aren't designed to plug into a standard socket, but rather are wired hard and fed into an oven ring circuit. This is because they typically consume more than 20 amps when the gas hob and electric oven are used.
Therefore, you will not find a dual fuel range cooker that could be fitted to a standard socket as this could create a serious fire risk and would be against electrical safety regulations. A licensed electrician will install any new electrical components to a cooker in the kitchen, and they will ensure that the total load (both the hob and oven) will not exceed the capacity of supply of the circuit.
The advantages of a dual fuel range cooker are the receptive cooking power of a gas stove with the precision of an electric oven. They are therefore a favorite among both chefs and home cooks. Dual cookers with fuel ranges are ideal for experimenting with various cooking techniques, such as searing or grilling.
When buying a new cook, you should be aware of a number of aspects that include size, performance and cost. It is also necessary to have an electrical connection to your home for the appliance. If you're not sure then hire a Gas Safe engineer to inspect your home prior to installing.
Currys' dual fuel range cookers come in a variety of models to meet all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If you're looking for something a little more advanced we also carry an extensive selection of premium JennAir ranges, which come with several new features.
When purchasing a new dual fuel range cooker, it's crucial to consult the manual of the owner for specific details on the gas and electrical requirements. You will need an electric connection to your home. A plumber could be required to set it up for you. You might also require an individual cooker-ring circuit installed by an experienced electrical engineer.